eMMC BGA162 Pinout for eMMC Pro

BGA 162 Pinouts and Details

There are some cases that you may need to connect eMMC IC directly to eMMC Pro which we call this operation as Chip-off ! In that case if you do "NOT" have any socket either you can connect with the break-out PCBs we provided or you can easily solder few wires to eMMC IC as it is in the Red mi 1S picture below .
Signals are the same : VCC , VCCQ , DAT0 , CLK , CMD and VSS as GND

Redmi 1S with BGA162

eMMC Pinouts for the BGA162

BGA162 Pinouts

All Rights Reserved, eMMC PRO 2014